Easy To Make Corbel Bedside Tables

Spruce up your bedroom with easy-to-make decorative bedside tables. They take less than a weekend to make and cost less than $100 in materials.

To make this space-saving table, a store-bought corbel is topped off with plywood and decorative molding.
Materials and Tools:
  • two corbels
  • thin molding
  • birch plywood
  • table or circular saw
  • wood glue
  • nail gun and nails
  • screw gun and screws
Steps:
1. Determine the size of the table, cut the plywood to that size for the tabletop. We made our table 10” x 12”.
2. Cover the exposed plywood edges with molding. Use wood glue and a nail gun to attach the molding. Only cover the front and two sides, the backside will be pressed against the wall.
3. Attach the corbel to the tabletop using wood glue and a nail gun.
4. Paint or stain the wood as desired and let it dry completely. We painted ours white.
5. If the corbel has a keyhole notch in the back, insert a screw into the wall so that you can slip the corbel onto the wall. If your table is wide, you may also have to hang a cleat on the wall to support the tabletop.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Build an Easy to Make Slatted Headboard

Add instant charm and personality to your bedroom with a wooden headboard. It takes less than a weekend to build and less than $100 in materials.

A headboard can add sophistication to any plain bedroom.
Tools and Materials: 
  • 16 clear pine 1x4s
  • dark stain, paintbrushes and rags
  • chop saw
  • wood glue
  • nail gun
  • screw gun and screws
Steps: 
1. Decide how large you would like your headboard to be. Typically the headboard is as wide as the bed, but it can look nice extra long or extra short, depending on the design and style of your room.
2. Cut the desired amount of slats to the appropriate length, miter cut the end of each slat. The slats in our headboard are 1-1/2” thick. To save money we bought 1x4s and cut them in half lengthwise.
3. Cut two extra slats for the vertical pieces that will be used to hold all the slats together. These do not need to be miter cut.
4. Cut two inch returns for each side of each slat. Make a 45-degree cut at one end of each piece so it will fit snugly against the end of a slat. The flat side of the return will go against the wall. Use wood glue and a nail gun to attach the returns to the slats.
5. Sand all the pieces until smooth.
6. Stain all the pieces and let dry completely.
7. Line up all of the pieces of the headboard with the returns facing up (the front of the headboard facing down). Use uniform-size scrap blocks of wood in between each slat to make sure they are spaced evenly apart.
8. Lay the two vertical pieces across the slats making sure they are also evenly spaced. Screw the two vertical pieces to each slat, connecting the entire structure. Make sure the screws are not too long, you don’t want them poking through the front of the headboard.
9. Put the headboard in place. Make sure it is level before securing it in place with 3”-drywall screws. Drive the screws through the two vertical pieces and right into the wall studs.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

How to Make an Upholstered Headboard

You can change your headboard with the seasons with this decorating project.

Materials and Tools:

  • foam core board
  • craft knife
  • fusible fleece
  • fusible adhesive  
  • iron
  • pressing cloth
  • trim
  • glue gun
  • fabric scraps
  • fusible patterns
  • self-stick hook-and-loop tape


Steps:
1. Determine the shape of the headboard, and draw its outline on the foam core board. Repeatedly score the outline with a craft knife until it cuts completely through the board.
2. Cut three layers of fusible fleece to the dimensions of the headboard, and align them on the foam core. Place a pressing cloth over the fleece, spray it lightly with water, and then press the fleece with an iron. All three layers will fuse at once.

3. Cut the fabric slightly larger than the foam core so that its edges wrap around the sides and onto the back of the board.

4. Starting in the center and working out to the edges, press the fabric onto the fleece.

5. Iron a strip of fusible adhesive to the edge of the fabric, remove the protective paper and fuse the fabric onto the back of the board.

6. Cut a piece of fabric about ½-inch smaller than the dimensions of the board. Fuse it to the back of the board so that it covers the raw edges of the fabric fused to the front.

7. Apply trim around the edges of the headboard with a glue gun.
 
8. Fuse pattern onto coordinating fabric. Cut out the pattern, remove the paper backing and iron the design onto the headboard, pillows, dust ruffle or other accessories.

9. Attach the headboard to the wall with self-adhesive hook-and-loop tape. Apply a little glue to the part of the tape attached to the headboard, and press it onto the part of the tape attached to the wall to make a more secure bond.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS